Extremely low formaldehyde gas release: All panels shown herein are free from restriction on surface area even in interior-wall applications under standard Japanese governmental regulations.
![]()
Standard NEOMA™ Foam panel, based on NEOMA™ HPPF


Components and thermal conductivity
| Foam | Surface | Density | Therm. cond. |
|---|---|---|---|
| HPPFa | PEb | 27 kg/m³ | 0.020 W/mK |
Abbreviations and notes
a HPPF: NEOMA™ high-performance phenolic foam.
b PE: Polyester nonwoven fabric.
Specifications
S: Stock sizes; O: Made on order
| Thick (mm) |
Width × Length (mm) | Therm. res. (m²K/W) |
||
|---|---|---|---|---|
| 910 × 1820 | 910 × 3030 | 1000 × 2000 | ||
| 20 | S | 1.00 | ||
| 25 | S | 1.25 | ||
| 30 | S | 1.50 | ||
| 35 | S | 1.75 | ||
| 40 | S | 2.00 | ||
| 45 | S | 2.25 | ||
| 50 | S | 2.50 | ||
| 60 | S | 3.00 | ||
| 66 | S | 3.30 | ||
![]()
For 30- and 60-minute class exterior fireproof spanwalls


Components
| NEOMA™ Foam (40 kg/m³) | Cement-bonded wood-wool board | Adhesive |
|---|
Abbreviations and notes
c Cement-bonded wood-wool board.
Specifications
Made on order
| Class* (min) |
Prod. No. |
W × L (mm) |
Thick (mm) | Weight (kg/m²) |
Thermal | ||
|---|---|---|---|---|---|---|---|
| Tot. | NF | Res. (m²K/W) | Trans. (W/m²K) | ||||
| 30 | 20K-21 | 910 × 1820 | 41 | 21 | 18.8 | 1.19 | 0.75 |
| 20K-25 | 45 | 25 | 19.0 | 1.38 | 0.66 | ||
| 20K-30 | 50 | 30 | 19.2 | 1.61 | 0.57 | ||
| 60 | 25K-21 | 910 × 1820 | 46 | 21 | 23.3 | 1.23 | 0.73 |
| 25K-25 | 50 | 25 | 23.5 | 1.42 | 0.64 | ||
| 25K-30 | 55 | 30 | 23.7 | 1.66 | 0.56 | ||
* Fireproof class determined in combination with exterior metal.
![]()
For non-combustible steel ceiling or wall, inner or outer insulation


Components and thermal conductivity
| NEOMA™ Foam (27 kg/m³) | Al foil | Adhesive |
|---|---|---|
| Thermal conductivity: 0.020 W/mK | ||
Specifications
Made on order
| Thick (mm)* | Width × Length (mm)* | Therm. res. (m²K/W) |
|---|---|---|
| 20 | 900 × 1800 | 1.00 |
| 25 | 1.25 | |
| 30 | 1.50 | |
| 35 | 1.75 | |
| 50 | 2.50 |
*Inquire for other sizes.
![]()
For construction of waterproof layer in steel roof


Components and thermal conductivity
| Foam | Surface | Density | Therm. cond. |
|---|---|---|---|
| HPPFa | Thick PEb | 40 kg/m³ | 0.021 W/mK |
Abbreviations and notes
a HPPF: NEOMA™ high-performance phenolic foam.
b PE: Polyester nonwoven fabric.
Specifications
| Thick (mm)* | Width × Length (mm)* | Therm. res. (m²K/W) |
|---|---|---|
| 30 | 1000 × 3000 | 1.42 |
*Inquire for other sizes.
![]()
For deep-penetration test waterproof layer in steel roof


Components and thermal conductivity
| Foam | Surface | Density | Therm. cond. |
|---|---|---|---|
| HPPFa | Thick PEb (2 sides) Al kraft paper (1 side) |
40 kg/m³ (HPPFa) |
0.021 W/mK |
Abbreviations and notes
a HPPF: NEOMA™ high-performance phenolic foam.
b PE: Polyester nonwoven fabric.
Specifications
| Thick (mm)* | Width × Length (mm)* | Therm. res. (m²K/W) |
|---|---|---|
| 30 | 1000 × 3000 | 1.42 |
*Inquire for other sizes.
![]()
For concrete-placement installation, as supplementary insulation


Components and thermal conductivity
| Foam | Surface | Density | Therm. cond. |
|---|---|---|---|
| HPPFa | PEb with special resin coating |
40 kg/m³ (HPPFa) |
0.020 W/mK* |
*At 12 mm thickness; 0.021 at 21 mm and 25 mm thickness.
Abbreviations and notes
a HPPF: NEOMA™ high-performance phenolic foam.
b PE: Polyester nonwoven fabric.
Specifications
| Thick (mm) | Width (mm) | Length (mm) | Therm. res. (m²K/W) |
|---|---|---|---|
| 12 | 455 | 1820 | 0.60 |
| 600 | |||
| 910 | |||
| 21 | 600 | 1.00 | |
| 910 | |||
| 25 | 910 | 1.19 |
![]()
For concrete-placement installation, in non-combustible interiors


Components and thermal conductivity
| Foam | Surface | Density | Therm. cond. |
|---|---|---|---|
| HPPFa | PEb +special resin 1 mm inorganic board |
40 kg/m³ (HPPFa) |
0.020 W/mK* |
*At 13 mm thickness; 0.021 at 22 mm, 26 mm, and 31 mm thickness.
Abbreviations and notes
a HPPF: NEOMA™ high-performance phenolic foam.
b PE: Polyester nonwoven fabric.
Specifications
| Thick (mm) | Width (mm) | Length (mm) | Therm. res. (m²K/W) |
|---|---|---|---|
| 13 | 450 | 1800 | 0.60 |
| 900 | |||
| 22 | 900 | 1.00 | |
| 26 | 900 | 1.19 | |
| 31 | 900 | 1.42 |